View AN11007_4579529.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

AN11007 single stage 5 - 6 ghz wlan lna with bfu730f rev. 1 ? 04 january 2011 application note d ocument information info content keywords bfu730f, lna, 802.11a & 802.11n mimo wlan abstract the document provides circuit, layout, bom and performance information on 5- 6 ghz band lna equipped with nxp?s bfu730f wide band transistor.
nxp semiconductors AN11007 5 - 6 ghz lna AN11007 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2011 . all rights reserved. application note rev. 1 ? 04 january 2011 2 of 23 contact information for additional information, please visit: http://www.nxp.com for sales office addresses, please send an email to: salesaddresses@nxp.com revision history rev date description 1.0 201 10104 initial document
nxp s emiconductors AN11007 5 - 6 ghz lna AN11007 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2011 . all rights reserved. application note rev. 1 ? 04 january 2011 3 of 23 1. introduction the bfu730f is a discrete hbt that is produced using nxp semiconductors? advanced 110 ghz f t sige:c bicmos process. sige:c is a normal silicon germanium process with the addition of carbo n in the base layer of the npn transistor. the presence of carbon in the base layer suppresses the boron diffusion during wafer processing. this allows steeper and narrower sige hbt base and a heavier doped base. as a result, lower base resistance, lower n oise and higher cut off frequency can be achieved. the bfu730f is one of a series of transistors made in sige:c. bfu710f; bfu760 and bfu790 are the other types, bfu710 is intended for ultra low current applications. the bfu760f and bfu790f are high curren t types and are intended for application where linearity is key. the bfu7xxf are ideal in all kind of applications where cost matters. it also gives design flexibility. 2. requirements and design of the 5 - 6 ghz wlan lna the circuit shown in this application n ote is intended to demonstrate the performance of the bfu730 in a 5 - 6 ghz lna for e.g. 802.11 & 802.11n ?mimo? wlan applications. key requirements for this application as are: ? nf ? gain ? turn on turn of time ? linearity. the target for this circuit is listed i n table 1. table 1. target spec. target specification of the 5 - 6ghz lna. vcc icc nf gain irl orl 3 10 <2 >15 >10 >10 v ma db db db db 3. design the 5 - 6 ghz lna consists of one stage bfu730f amplifier. for this amplifier 12 external components are used, for matchi ng, biasing and decoupling. the design has been conducted using agilent?s advanced design system (ads). the 2d em momentum tool has been used to co simulate the pcb see fig 1 . results are given in the lna shows a gain of 14 db @5.5 ghz, nf of 1.3 db, with only 10 ma it shows a high input p1 db compression of ? 7.5 dbm, as well as a input ip3 of +10 dbm. 4.5 . finally the lna is unconditional stable 10 mhz - 20 ghz.
nxp s emiconductors AN11007 5 - 6 ghz lna AN11007 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2011 . all rights reserved. application note rev. 1 ? 04 january 2011 4 of 23 3.1 bf u730f 5 - 6 ghz - ads simulation circuit fig 1. ads simulation circuit for 5 - 6 ghz wlan lna
nxp s emiconductors AN11007 5 - 6 ghz lna AN11007 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2011 . all rights reserved. application note rev. 1 ? 04 january 2011 5 of 23 3.2 bfu730f 5 - 6 ghz - ads gain and match simulation results fig 2. ads gain and match simulation results for 5 - 6 ghz wlan lna
nxp s emiconductors AN11007 5 - 6 ghz lna AN11007 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2011 . all rights reserved. application note rev. 1 ? 04 january 2011 6 of 23 3.3 bfu730f 5 - 6 ghz - ads nf simulatio n fig 3. ads noise figure simulation results of 5 - 6 ghz wlan lna
nxp s emiconductors AN11007 5 - 6 ghz lna AN11007 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2011 . all rights reserved. application note rev. 1 ? 04 january 2011 7 of 23 3.4 bfu730f 5 - 6 ghz - ads stability simulation as k 1 and mu 1, the lna is unconditionally stable for the whole frequency band fig 4. ads stability simulation results of 5 - 6 ghz wlan lna
nxp s emiconductors AN11007 5 - 6 ghz lna AN11007 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2011 . all rights reserved. application note rev. 1 ? 04 january 2011 8 of 23 4. implementatio n 4.1 schematic fig 5. 5 - 6 ghz lna schematic
nxp s emiconductors AN11007 5 - 6 ghz lna AN11007 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2011 . all rights reserved. application note rev. 1 ? 04 january 2011 9 of 23 4.2 layout and assembly fig 6. layout and assembly info of 5 - 6 ghz lna
nxp s emiconductors AN11007 5 - 6 ghz lna AN11007 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2011 . all rights reserved. application note rev. 1 ? 04 january 2011 10 of 23 table 2. bill of materials designator description size value type note q1 bfu730f 2x2 mm nxp semiconductors hbt pcb 20x35 mm c1,c7 capacito r 0402 3.9 pf muratagrm1555 input/output match c2,c6 capacitor 0402 0.75 pf muratagrm1555 input/output match c3 capacitor 0402 15 nf muratagrm1555 c4 capacitor 0402 1.5 pf muratagrm1555 c5 capacitor 0402 1.5 pf muratagrm1555 l1,l4 inductor 0402 1.5 n h murata lqp15 input/output match l2 inductor 0402 9.1 nh murata lqw15 input match l3 inductor 0402 5.1 nh murata lqw15 output match r1 resistor 0402 37 k bias setting r2 resistor 0402 100 ohm bias setting hfe and temp spread cancellation r3 resisto r 0402 10 ohm stability r4 resistor 0402 0 ohm na x1,x2 sma rf connector - johnson, end launch sma 142- 0701- 841 rf input/ rf output x3 dc header - molex, pcb header, right angle, 1 row, 3 way 90121 - 0763 bias connector 4.3 pcb layout. a good pcb layou t is an essential part of an rf circuit design. the evb of the bfu730 can serve as a guideline for laying out a board using either the bfu730 or one of the other sige.c hbts in the sot343f package. use controlled impedance lines for all high frequency inpu ts and outputs. bypass v cc with decoupling capacitors, preferable located as close as possible to the device. for long bias lines it may be necessary to add decoupling capacitors along the line further away from the device. proper grounding the emitters is also essential for the performance. either connect the emitters directly to the ground plane ore through vias, or do both. the material that has been used for the evb is fr4 using the stack shown in fig 7 .
nxp s emiconductors AN11007 5 - 6 ghz lna AN11007 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2011 . all rights reserved. application note rev. 1 ? 04 january 2011 11 of 23 (1) material supplier is isola duraver; er=4.6 - 4.9 t =0.02 fig 7. pcb material stack 4.4 lna view fig 8. 5 - 6 ghz lna evb
nxp s emiconductors AN11007 5 - 6 ghz lna AN11007 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2011 . all rights reserved. application note rev. 1 ? 04 january 2011 12 of 23 4.5 measurement results table 3. typical measurement results measured on the evaluation board. temp=25 c, frequency is 5.5 ghz unless otherwise specified. para meter symbol value unit remarks supply voltage v cc 3 v supply current i cc 10 ma noise figure nf [1] 1. 3 db power gain 5.0 ghz g p 15.8 db 5.5 ghz 14.7 db 6.0 ghz 13.7 db input return loss irl 12 db output return loss orl 13.5 db input 1 db gain compression point p i 1db - 7.5 dbm output 1 db gain compression point p o 1db +6.5 dbm input third order intercept point ip3 i +10 dbm output third order intercept point ip3 o +24 dbm power settling t ime ton 130 ns toff 185 ns [1] the nf and gain figures are being measured at the sma connectors of the evaluation board, so the losses of the connectors and the pcb of approximately 0.1db are not subtracted.
nxp s emiconductors AN11007 5 - 6 ghz lna AN11007 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2011 . all rights reserved. application note rev. 1 ? 04 january 2011 13 of 23 4.5.1 gain and match ? typical results fig 9. gain and match measured values
nxp s emiconductors AN11007 5 - 6 ghz lna AN11007 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2011 . all rights reserved. application note rev. 1 ? 04 january 2011 14 of 23 4.5.2 nf and gain - typical values (1) nf is measured at sma connectors so no correction was done. fig 10. typical nf curve
nxp s emiconductors AN11007 5 - 6 ghz lna AN11007 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2011 . all rights reserved. application note rev. 1 ? 04 january 2011 15 of 23 4.5.3 stability fig 11. stability typical measurement results
nxp s emiconductors AN11007 5 - 6 ghz lna AN11007 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2011 . all rights reserved. application note rev. 1 ? 04 january 2011 16 of 23 4.5.4 1db compression point - typical values. (1) p i 1db = - 7.4 dbm p o 1db=6.5 dbm fig 12. typical 1 db compression point curve.
nxp s emiconductors AN11007 5 - 6 ghz lna AN11007 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2011 . all rights reserved. application note rev. 1 ? 04 january 2011 17 of 23 4.5.5 linearity ip3 ? typical values (1) ip3 o = - 6.2+((66.7 - 6.2)/2)=+24 dbm; ip3 i = - 20 dbm+60.5/2= - 20+30.25=+10.25 fig 13. im3 - typical values
nxp s emiconductors AN11007 5 - 6 ghz lna AN11007 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2011 . all rights reserved. application note rev. 1 ? 04 january 2011 18 of 23 4.5.6 power settling time (1) green curve is power supply; black curve is the video out of the spectrum analyzer. fig 14. t on power on settling time
nxp s emiconductors AN11007 5 - 6 ghz lna AN11007 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2011 . all rights reserved. application note rev. 1 ? 04 january 2011 19 of 23 (1) green curve is power supply; black curve is the video out of the spectrum analyzer. fig 15. t off power off settling time
error! unknown document property name. error! unknown document property name. error! unknown document property nxp semiconductors AN11007 5 - 6 ghz lna AN11007 all inform ation provided in this document is subject to legal disclaimers. ? nxp b.v. 2011 . all rights reserved. application no te rev. 1 ? 04 january 2011 20 of 23 5. legal information 5.1 definitions draft ? the document is a draft version only. the content is still under internal review and subject to formal approval, which may result in modifications or additions. nxp semiconductors does not give any representations or warranties as to the accuracy or completeness of informa tion included herein and shall have no liability for the consequences of use of such information. 5.2 disclaimers limited warranty and liability ? information in this document is believed to be accurate and reliable. however, nxp semiconductors does not give a ny representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. in no event shall nxp semiconductors be liable for any indirect, inc idental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. notwithstanding any damages that customer might incur for any reason whatsoever, nxp semiconductors? aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the terms and conditions of commercial sale of nxp semiconductors. right to make changes ? nxp semiconductors reserves the right to make changes to information published in this document, including witho ut limitation specifications and product descriptions, at any time and without notice. this document supersedes and replaces all information supplied prior to the publication hereof. suitability for use ? nxp semiconductors products are not designed, autho rized or warranted to be suitable for use in life support, life - critical or safety - critical systems or equipment, nor in applications where failure or malfunction of an nxp semiconductors product can reasonably be expected to result in personal injury, dea th or severe property or environmental damage. nxp semiconductors accepts no liability for inclusion and/or use of nxp semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer?s own risk. applica tions ? applications that are described herein for any of these products are for illustrative purposes only. nxp semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or mod ification. customers are responsible for the design and operation of their applications and products using nxp semiconductors products, and nxp semiconductors accepts no liability for any assistance with applications or customer product design. it is cust omer?s sole responsibility to determine whether the nxp semiconductors product is suitable and fit for the customer?s applications and products planned, as well as for the planned application and use of customer?s third party customer(s). customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. nxp semiconductors does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer?s applications or products, or the application or use by customer?s third party customer(s). customer is responsible for doing all necessary testing for the customer?s applications and products using nxp semiconductors products in o rder to avoid a default of the applications and the products or of the application or use by customer?s third party customer(s). nxp does not accept any liability in this respect. export control ? this document as well as the item(s) described herein may b e subject to export control regulations. export might require a prior authorization from national authorities. evaluation products ? this product is provided on an ?as is? and ?with all faults? basis for evaluation purposes only. nxp semiconductors, its affiliates and their suppliers expressly disclaim all warranties, whether express, implied or statutory, including but not limited to the implied warranties of non - infringement, merchantability a nd fitness for a particular purpose. the entire risk as to the quality, or arising out of the use or performance, of this product remains with customer. in no event shall nxp semiconductors, its affiliates or their suppliers be liable to customer for any s pecial, indirect, consequential, punitive or incidental damages (including without limitation damages for loss of business, business interruption, loss of use, loss of data or information, and the like) arising out the use of or inability to use the produc t, whether or not based on tort (including negligence), strict liability, breach of contract, breach of warranty or any other theory, even if advised of the possibility of such damages. notwithstanding any damages that customer might incur for any reason whatsoever (including without limitation, all damages referenced above and all direct or general damages), the entire liability of nxp semiconductors, its affiliates and their suppliers and customer?s exclusive remedy for all of the foregoing shall be limi ted to actual damages incurred by customer based on reasonable reliance up to the greater of the amount actually paid by customer for the product or five dollars (us$5.00). the foregoing limitations, exclusions and disclaimers shall apply to the maximum ex tent permitted by applicable law, even if any remedy fails of its essential purpose. 5.3 trademarks notice: all referenced brands, product names, service names and trademarks are property of their respective owners.
nxp semiconductors AN11007 5 - 6 gh z lna AN11007 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2011 . all rights reserved. application note rev. 1 ? 04 january 2011 21 of 23 6. list of figures fig 1. ads simulation circuit for 5 - 6ghz wlan lna ... 4 fig 2. ads gain and match simulation results for 5 - 6ghz wlan lna ............................................. 5 fig 3. ads noise figure simulation results of 5 - 6ghz wlan lna ........................................................ 6 fig 4. ads stability simulation results of 5 - 6ghz wlan lna ................................................................... 7 fig 5. figure title here .. error! bookmark not defined. fig 6. 5 - 6 ghz lna schematic ..................................... 8 fig 7. layo ut and assembly info of 5 - 6ghz lna ......... 9 fig 8. pcb material stack ........................................... 11 fig 9. 5 - 6 ghz lna evb ............................................ 11 fig 10. gain and match measured values .................... 13 fig 11. typical nf curve .............................................. 14 fig 12. stability typical measurem ent results ............... 15 fig 13. typical 1 db compression point curve. ............. 16 fig 14. im3 - typical values .......................................... 17 fig 15. t on power on settling time ................................. 18 fig 16. t off power off settling time ................................. 19
nxp semiconductors AN11007 5 - 6 ghz lna AN11007 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2011 . all rights reserved. application note rev. 1 ? 04 january 2011 22 of 23 7. list of tables table 1. target spec. ...................................................... 3 table 2. bill of materials ................................................ 10 table 3. typical measurement results measured on the evaluation board. ............................................ 12
nxp semiconductors AN11007 5 - 6 ghz lna please be aware that important notices concerning this document and the product(s) described herein, have been included in the section 'legal information'. ? nxp b.v. 2011 . all rights reserved. for more information, please visit: http://www.nxp.com for sales office addresses, please send an email to: salesaddresses@nxp.com date of release: 04 january 2011 document identifier: AN11007 8. contents 1. introduction ......................................................... 3 2. requirements and design of the 5 - 6 ghz wlan lna ........................................................... 3 3. design .................................................................. 3 3.1 bfu730f 5 - 6ghz - ads simulation circuit ............. 4 3. 2 bfu730f 5 - 6ghz - ads gain and match simulation results ............................................... 5 3.3 bfu730f 5 - 6ghz - ads nf simulation .................. 6 3.4 bfu730f 5 - 6ghz - ads stabili ty ............................ 7 4. implementation .................................................... 8 4.1 schematic .............................................................. 8 4.2 layout and assembly ............................................ 9 4.3 pcb layout. ......................................................... 10 4.4 lna view ............................................................. 11 4.5 measurement results ........................................... 12 4.5.1 gain and match ? typical results ......................... 13 4.5.2 nf and gain - typical values ................................ 14 4.5.3 stability ................................................................ 15 4.5.4 1db compression point - typical values. ............... 16 4.5.5 linearity ip3 ? typical values ............................... 17 4.5.6 power settling time .............................................. 18 5. legal information .............................................. 20 5.1 definitions ............................................................ 20 5.2 disclaimers .......................................................... 20 5.3 trademarks ......................................................... 20 6. list of figures ..................................................... 21 7. list of tables ...................................................... 22 8. contents ............................................................. 23

▲Up To Search▲

Price & Availability of AN11007

	To Download AN11007 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .